Industrial Valves

Our company is engaged in the supplying of different types of industrial valves, which provide protection from over-pressure in steam, gas, air and liquid lines. We offer industrial valves as per international standards as well as per clients' specifications and requirements. These all valves are used in pressure controlling , releasing , holding as per the application desired by different industries.

 
EnglishJapaneseSpanishFrenchItalian

 

1. Gate Valves

Gate valves are designed to provide minimum turbulence & resistance to flow when in fully open position. These gate valves ensure accurate control & alignment of wedge while operating.

Technical Specification  
Size : 15mm to 300mm
Std. : Generally conforming to BS 5352 End Connection
Screwed Ends to BSP / BSPT/ NPT (F) Socket Weld Ends to ANSI B 16.11 Inspection
Material : SS 316/ SS 304/ Brass or any special material
Different Type Of End Connections : NPT, BSPT etc connections
^ Go Top

2. Globe Valves

Globe valve is used for single direction flow control and is also efficient for throttling services. These valves are designed for least possible obstruction to free flow.

Technical Specification  
Size : 15NB to 50NB
Std. : Generally conforming to BS 5352 End Connection
Screwed Ends to BSP / BSPT/ NPT (F) Socket Weld Ends to ANSI B 16.11 Inspection
Material : SS 316/ SS 304/ Carbon Steel or any special material
Different Type Of End Connections : NPT, BSPT etc connections
^ Go Top

3. Safety Valves

Safety valve provides protection from over-pressure in steam, gas, air and liquid lines. The valve "lets off steam" when safe pressures are exceeded, then closed again when pressure drops to a preset level.

Technical Specification  
½” to 4” (15 mm to 100 mm)
Manufacturing Standard Spring loaded Relief type open Discharger Enclosed Discharger
Ends Flanged to ANSI B16.5 Table D / E F other Material & Specifications are Welcome
Screwed to BSP / BSPT / NPT
Body & Bonnet , spring : SS 316/ SS 316 L/SS 304/ CS or any special material
^ Go Top

4. Check Valve

Our company offers left check valve, which are ideal to reduce flow resistance and pressure drop to the minimum possible level. They are perfectly engineered, lapped and screwed in seat to ensure tight shut-off and long life.

Technical Specification  
High working pressures.
Size : 1/8" (3 mm) to 1" (25 mm)
Suitable upto 5000 PSI
Material : SS 316/ SS 304/ CS or any special material
Different type of end connections viz: Double ferrule type, NPT, BSPT etc connections
^ Go Top

5. Needle Valve

Needle valves come in bar stock as well as in forged construction various sizes, sealing styles, end connections and stem types. Main feature of Needle valves is that its stems are interchangeable with any of its valves of the similar configurations thus resulting in low cost and less inventory

Technical Specification  
Screwed or socket weld ends , double bonnet, back seat, self centering tip
For all kinds of high/medium/low pressure and vacuum applications.
OD Size : 1/8'' to 2''
Thread Size : ¼” to 2”
Suitable upto 10000 PSI
Material : SS 316/ SS 316 L/SS 304/ CS or any special material
Different type of end connections viz : Double ferrule type, NPT, BSPT etc connections
^ Go Top

6. Ball Valves

Ball valves are of soft seated, Floating Ball.  The Stem Flange, on entire part of the stem, prevents the stem from blowing out pressure within the body cavity.  This feature also allows replacement of stem packing while the valve is under pressure. These ball valves are used generally for quick shut off.

Technical Specification  
Range : 1/2'' to 12''
Pressure Class : ANSI 150# to 600
End Connections : Flanged, Screwed, Butt and Socket Welded
Manufacturing Standards : BS-5351
Face to Face: as per ANSI B 16.10
End Flanges : as per ANSI/BS/DIN
Body Type: Single/Two/Three piece design
Ball : Full/Reduced Bore
^ Go Top

7. Manifolds Valves (2 Ways/ 3 ways/ 5 ways)

Manifolds valves are designed for remote or separate mounting. Connecting system impulse lines and transmitters, having 2/3/5/multi valves configuration which allows for easy block or Isolate, valve calibration of a static pressure transmitter or gauge.

Technical Specification  
Spindle tip-Non rotating tip shut off type - stellited, Regulating-stellited and soft seated.
Screwed bonnet design Suitable upto 5000 PSI
Bonnet-back seated blow out proof
Working Pressure : 6000 Psi (413 Bar)
Body Material : AISI SS304, 316, monel etc.
Inlet Conn : 3/8", 1/2 BSP/NPT (F) both side adapters.
Outlet Conn : 3/8",1/2" BSP/NPT (M)
Note : Available in 2 Ways, 3 Ways & 5 Ways
^ Go Top
Copyright © 2009 - 2011 pressureinstruments.co.in. All right reserved.
Best viewed on 1024x768 resolution.
www.yashgauges.com     www.yashvalves.com